Accessories & Misc.

Arkfeld Spring 3 is limited to 1,800 worldwide. ● Premium Materials: Spring 3 is made of titanium alloy with a mirror-polished, PVD dazzler and AF finish. This process helps prevent discoloration and makes the flashlight a more exquisite...

Handle Length: 4.25'' | 10.80cm Handle Width: 0.95'' | 2.41cm Shaft Length: 1.85'' | 4.69cm Total Length: 6.10'' | 15.49cm Bit Length: 1.10'' | 2.79cm Bits: T5 Torx T6 Torx T8 Torx T10 Torx 0.050" Hex 1/16 Hex 2mm Slotted 4mm...

This listing for the THREE INCH XM-18 folder model!This hardware kit contains solid brass hardware.This kit includes:1- 3″ Pivot Screw1- 3″ set of handle nuts1- 3″ set of standoffs1- 3″ set of handle screws1- Lockbar...

Curve Features Unique design maintains 25 degree angle 325 Grit Diamond Hones Ultra compact Easy to use No adjustments Also available in RED and BLUE Same Angle – Same Pressure – Both Sides – Every time! The Curve is an...

VSharp A4 Features: Breakthrough 15-degree angle for high end specialty knives. Patented V-Sharp system for precision angle adjustments. Comes with premium rubber base 4 Adjustable Angles 15-20- 25- 30. 325 Grit Natural Diamond Hones with...

Fits the XM-18 3.0in blade folder Will require you to disassemble and reassemble your XM-18 Marked on the back side with the “Flaming Horse” logo to assure its a genuine RHK Scale!

Fits the XM-18 3.0in blade folder Will require you to disassemble and reassemble your XM-18 Marked on the back side with the “Flaming Horse” logo to assure its a genuine RHK Scale!

Fits the XM-18 3.0in blade folder Will require you to disassemble and reassemble your XM-18 Marked on the back side with the “Flaming Horse” logo to assure its a genuine RHK Scale!

Fits the XM-18 3.0in blade folder Will require you to disassemble and reassemble your XM-18 Marked on the back side with the “Flaming Horse” logo to assure its a genuine RHK Scale!

Fits the XM-18 3.0in blade folder Will require you to disassemble and reassemble your XM-18 Marked on the back side with the “Flaming Horse” logo to assure its a genuine RHK Scale!

Fits the XM-18 3.0in blade folder Will require you to disassemble and reassemble your XM-18 Marked on the back side with the “Flaming Horse” logo to assure its a genuine RHK Scale!

Fits the XM-18 3.0in blade folder Will require you to disassemble and reassemble your XM-18 Marked on the back side with the “Flaming Horse” logo to assure its a genuine RHK Scale!

Fits the XM-18 3.0in blade folder Will require you to disassemble and reassemble your XM-18 Marked on the back side with the “Flaming Horse” logo to assure its a genuine RHK Scale!

Keep it neat and trim with the Kershaw Manicure Kit. Everything fits conveniently in a metal-trimmed case so it's easy to take along when traveling. The set includes four stainless steel tools; everything one needs to keep well-groomed on the go...

This is the right tool for adjusting your Kershaws. Switch a pocketclip, tighten a screw, or adjust the pivot tension with the TX-Tool. It includes five key bits for adjusting your Kershaws: T6, T8, T10, and a #2 Phillips® for most Kershaws, plus...

● Dual Light Source EDC Flashlight: White light in 5 brightness levels with a max output of 1,000 lumens, and the output of green beam is ≤0.39mW, Class 1. The lights memory function enables you to save your favorite mode so it's always...

600 Grit – Medium / 325 Grit – Coarse

Benchmade 50080 20° Guided Hone Tool Benchmade's Lightweight and Compact 50080 20° Guided Hone Tool has a controlled 20 degree angle featuring a ceramic rod and leather strop to keep your edge sharp.   SPECIFICATIONS LENGTH - 5.50” |...

● Powerful For Its Size: Compact and lightweight, powered by a widely available single AA battery, it delivers a max output of 300 lumens and a max throw of 60 meters ● Highly Integrated Tail Switch: The user can turn the light momentarily on...

Cleans and protects your Benchmade.